Products

Filters (18)
Filters
Category
Connectable sensors by interface
Connectable sensors by properties
Embedded sensors
Number of input channels
Galvanic isolation of inputs
Data interface and protocol
Antenna
Power
Connectable to repeater-gateway
Communication network
Encryption
Minimal ingress protection
Device cover type
Installation type
Show (18)
Cancel

Category - construction

Remote monitoring products associated with building and construction diagnostics. They support different types of sensors:

  • analogue (voltage, potentiometric)
  • digital
  • vibrating wire (VW) based
  • “smart” types of sensors with data interface: RS232, RS485 and MODBUS protocol.
  • Specially developed sensors for the construction industry to detect stiffness or distortion in structures (typically on bridges with prestressed concrete.)
    • electronic detection slides (crack and joint opening)
    • detectors of changes in the structure’s own vibrations (changes in stiffness)

The devices are normally in sleep mode to last typically 5-15 years on a single battery, taking measurements at regular intervals or on stimulus, and sending the data across the entire IoT network for further processing.

SENSECOM-HP1

SENSECOM-HPN1

Remote transmission for vibrating wire (VW) sensors using a nationwide LPWAN IoT network NB-IoT.

SENSECOM-TR6

Remote transmission device for temperature monitoring of up to 6 thermistors using LPWAN IoT network SIGFOX, built in antenna.

SENSECOM-SK2

Remote monitoring of crack detectors with data transmission via nationwide LPWAN IoT network SIGFOX

SENSECOM-HP1

SENSECOM-HP1

Remote transmission for vibrating wire (VW) sensors using a nationwide LPWAN IoT network SIGFOX.

SENSECOM HPC

SENSECOM-HPC

Remote transmission for 1-5 vibrating wire (VW) sensors using a nationwide LPWAN IoT network SIGFOX.

SENSECOM-ACH

SENSECOM-ACH

Remote monitoring of tilt using the nationwide LPWAN IoT network SIGFOX

SENSECOM-WNH (gateway)

NB-IoT communication gateway from several SENSECOM end devices simultaneously (via WLAN) to the national NB-IoT network.

SENSECOM-WSH (repeater)

Repeater for transferring data from selected type of SENSECOM device from WLAN to a nationwide SIGFOX network.

SENSECOM-DI6

Remote transmission device for digital inputs monitoring using LPWAN IoT network SIGFOX, built in antenna.

SENSECOM-DI6K

Remote transmission device for digital inputs using LPWAN IoT network SIGFOX

SENSECOM-IDH

SENSECOM-IDH2

Robust RFID card readings (with resolution of reading purpose by 2 buttons) with transmission data over IoT nationwide network SIGFOX

SENSECOM-IDH

SENSECOM-IDH1

RFID card readings with transmission data over IoT nationwide network SIGFOX

IoT analog transmission

SENSECOM-ANC

IoT transmission device for 1-3 analog sensors via nationwide LPWAN IoT network SIGFOX

SENSECOM-WSHD (repeater)

Repeater for transferring data from several selected SENSECOM devices in WLAN to a nationwide SIGFOX network.

SENSECOM-KL2B

Icing measurement, temperature (of construction), relative humidity with data transmission via national IoT network SIGFOX, expandable to a meteostation with anemometer (or use model SENSECOM-KL2).

SENSECOM-KL2

Icing measurement including meteo – temperature (of construction), humidity, anemometer (wind intensity and direction) with data transmission via national IoT network SIGFOX.

Copyright © 2022 SmartImp