SENSECOM-CMNS
Remote meter reading from smart (AMM) meters using a nationwide NB-IoT network Input interface HAN (P1) with RJ12 connector Communication protocol DLMS (push mode) Reads the entire set of OBIS codes that are periodically sent by the AMM meter to the HAN data interface Sends from the read set to the Senseparam portal the following […]
SENSECOM-IDN1
RFID card readings with transmission data over IoT nationwide network Applicable for people’s occasional entrances to buildings, workplaces, walk points, vigilance button Suitable for outdoor, dusty and otherwise demanding industrial applications. RFID reader activated by single button (model IDN1) Endurance > 2 years without battery replacement (~5 messages per day) Outdoor IP67 Transmission using NB-IoT nationwide network
SENSECOM-IDN2
RFID card readings with transmission data over IoT nationwide network Applicable for people’s occasional entrances to buildings, workplaces, walk points, vigilance button Suitable for outdoor, dusty and otherwise demanding industrial applications. RFID reader activated by one of two buttons to distinguish purpose of reading (model IDN2) Endurance > 2 years without battery replacement (~5 messages […]
SENSECOM-OMN
Remote transmission of energy meter data using the IEC62056-21 optical data interface via the nationwide LPWAN network NB-IoT
SENSECOM-OMD
Remote transmission of meter data using the IEC62056-21 optical data interface via the SIGFOX nationwide LPWAN IoT network
SENSECOM-ACH
Remote monitoring of tilt using the nationwide LPWAN IoT network SIGFOX
SENSECOM-WNH (gateway)
NB-IoT communication gateway from several SENSECOM end devices simultaneously (via WLAN) to the national NB-IoT network.
SENSECOM-WSH (repeater)
Repeater for transferring data from selected type of SENSECOM device from WLAN to a nationwide SIGFOX network.
SENSECOM-IDH2
Robust RFID card readings (with resolution of reading purpose by 2 buttons) with transmission data over IoT nationwide network SIGFOX
SENSECOM-IDH1
RFID card readings with transmission data over IoT nationwide network SIGFOX
SENSECOM-WSHD5 (gateway, 5ch)
Communication gateway for transferring data from 1-5 selected SENSECOM devices in WLAN to a nationwide SIGFOX network.
SENSECOM-WSHD3 (gateway, 3ch)
Communication gateway for transferring data from 1-3 selected SENSECOM devices in WLAN to a nationwide SIGFOX network.
SENSECOM-WSHD (repeater)
Repeater for transferring data from several selected SENSECOM devices in WLAN to a nationwide SIGFOX network.
SENSECOM – AC1
Remote monitoring of motion, vibration or tilt using the SIGFOX nationwide LPWAN IoT network.