Remote meter reading from smart (AMM) meters using a nationwide NB-IoT network
- Input interface
- HAN (P1) with RJ12 connector
- Communication protocol
- DLMS (push mode)
- Reads the entire set of OBIS codes that are periodically sent by the AMM meter to the HAN data interface
- Sends from the read set to the Senseparam portal the following values
- Basic mode – Consumption (individual active tariffs), Production (if active), Meter number
- Extended mode – any OBIS codes sent by the AMM that the user sets
- Adjustable reading interval 1min-24h (reads the next received message from the AMM within the given period)
- small housing, IP20
- Powered by built-in rechargeable battery (LiPol 2000mAh), rechargeable (or permanently powered) via USB-C
- Communication via nationwide LPWAN IoT network: NB-IoT
Use:
The consent of the electricity distributor is usually not required for connection to AMM meters using the HAN interface, the RJ12 socket is freely accessible on these meters (not part of the meter sealing area).
It does not require professional installation unless a power supply or socket needs to be installed.
