SENSECOM-IMG6
6-channel impulse signal separator with built-in communication to NB-IoT
SENSECOM-CMNS
Remote meter reading from smart (AMM) meters using a nationwide NB-IoT network Input interface HAN (P1) with RJ12 connector Communication protocol DLMS (push mode) Reads the entire set of OBIS codes that are periodically sent by the AMM meter to the HAN data interface Sends from the read set to the Senseparam portal the following […]
SENSECOM-CMNT
Remote reading device for MODBUS serial data transmission over RS485 from 1 or more connected devices using nationwide LPWAN network NB-IoT
SENSECOM-IDN1
RFID card readings with transmission data over IoT nationwide network Applicable for people’s occasional entrances to buildings, workplaces, walk points, vigilance button Suitable for outdoor, dusty and otherwise demanding industrial applications. RFID reader activated by single button (model IDN1) Endurance > 2 years without battery replacement (~5 messages per day) Outdoor IP67 Transmission using NB-IoT nationwide network
SENSECOM-IDN2
RFID card readings with transmission data over IoT nationwide network Applicable for people’s occasional entrances to buildings, workplaces, walk points, vigilance button Suitable for outdoor, dusty and otherwise demanding industrial applications. RFID reader activated by one of two buttons to distinguish purpose of reading (model IDN2) Endurance > 2 years without battery replacement (~5 messages […]
SENSECOM-OMN
Remote transmission of energy meter data using the IEC62056-21 optical data interface via the nationwide LPWAN network NB-IoT
SENSECOM-WNH (gateway)
NB-IoT communication gateway from several SENSECOM end devices simultaneously (via WLAN) to the national NB-IoT network.