Unique features of IoT communication devices SENSECOM:

  • Low energy operation = years without battery replacement (> 95% of time in sleep mode)
  • Compactness = communicators with integrated sensors or with built-in interface to external sensors
  • High range = high-quality antenna system of the device and nationwide IoT coverage of the SIGFOX network
  • High security within SIGFOX network = Built-in firewall (no-internet/no-IP based wireless communication with device), Messages authentication, E2E encryption possible, HTTPS communication to SIGFOX Cloud
  • High transmission reliability = reception usually by several base stations simultaneously
  • Entirety = a broad portfolio of communicators focused on applications beyond the reach of wireless local area networks and wired connections
  • Low cost operation = low annual telecommunication fees

SENSECOM models:

 

AC1 Accelerometric shock and tilt detection, battery, IP20
ACH Accelerometric inclinometer, accuracy 1 °, battery, IP65 (IP67 with silicone)
ACP Accelerometric inclinometer, accuracy 0,1 °, battery, IP65 (IP67 with silicone)
ACPK Accelerometric inclinometer, accuracy 0,1 °, battery, IP65 (IP67 with silicone), external antenna
ANC Measurement of 1-3x analog signals with 18bit A/D, voltage -10 / 10V, 0 / 10V, potentiometric with excitation, battery, IP65
CMDO232T Reading with MODBUS via RS232, battery supply, DIN rail
CMDO232G Reading with MODBUS via RS232 with galvanic separation of inputs, mains supply, DIN rail
CMDO485T Reading with MODBUS via RS485 (half duplex), battery supply, DIN rail
CMDO485G Reading with MODBUS via RS485 (half duplex) with galvanic separation of inputs, mains supply, DIN rail
CMDO485FG Reading with MODBUS via RS485 (full duplex) with galvanic separation of inputs, mains supply, DIN rail
DI6 Monitoring of 6 binary inputs, battery, IP65 (IP67 with silicone)
DI6K Monitoring of 6 binary inputs, battery, IP65 (IP67 with silicone), external antenna
FU1L Monitoring the status of one blade fuse in the LV network, IP20, battery
FU3F Monitoring the status of three blade fuses (3-phase) and the presence of LV voltage on the phases, mains supply, IP20
HC1 Internal thermometer and hygrometer, CO2, mains supply via adapter, IP20
HP1 Measurement with probes based on vibrating wire (VW), 1 channel, battery, IP65 (IP67 with silicone)
HPC Measurement with probes based on vibrating wire (VW), 1-5 channels, battery, IP65 (IP67 with silicone)
HY1 Internal thermometer and hygrometer, battery, IP20
IC1 RFID and BARC code reader, IP20, mains supply
IDH1 RFID reader (e.g. entry cards), battery, IP65 outdoor
IMD Pulse counter S0 (galvanic isolation with optocoupler supply) and with second pulse counter for potential-free contact, 2-tariff/modes resolution for S0, mains supply, DIN rail
IMDB IMD pulse counter above with longer power backup
IMDBS IMD pulse counter above with longer power backup and electronic seal
IMDS IMD pulse counter above with electronic seal
KL1 Measurement of basic meteo values (temperature, relative humidity, wind direction and intensity), battery, IP65 (IP67 with silicone)
KL2 Measurement of icing intensity and extension to basic meteo values possible (temperature, relative humidity, wind direction and intensity), battery, IP65 (IP67 with silicone)
OMD Optical head reading IEC62056-21 with 1-13 OBIS registers (universal mode), battery, IP52
OMD-E Optical head reading IEC62056-21 with 4 fixed OBIS registers (consumption-2 tariffs, production, serial number EM), battery, IP52
SE4 Electronic seals – 4 circuits, battery, DIN rail design
SE8 Electronic seals – 8 circuits, battery, DIN rail design
SK2 Crack detection of building structures, 2 detectors, battery, IP65 (IP67 with silicone)
WSH Repeater WLAN – SIGFOX for selected SENSECOM devices with “C” battery, IP65
WSHD Repeater WLAN – SIGFOX for selected SENSECOM devices with “D” battery, IP65 (IP67 with silicone)