IoT Applications with transmission from RS232 or RS485 data interfaces

  • Readings from measuring exchanges
  • Meter register readings, especially in utilities (AMM, SmartCities)
  • Equipment monitoring

SENSECOM-CMD

  • Possible options of input interfaces:
    • RS485 (Half or Full duplex) with MODBUS
    • RS232 with MODBUS
  • 13 adjustable registers for readings (1-2 messages per register)
  • Adjustable Reading interval 10min-24h
  • DIN-3U, IP20
  • Mains supply
  • Communication to the nationwide IoT network SIGFOX
  • Connectable SENSECOM-WSH repeater for hard-to-reach places (basement, metal cabinets, etc.) up to 20 m
SENSECOM-CMD

Models:

CMDO232Readout with MODBUS via RS232
CMDO485Readout with MODBUS via RS485 (half duplex)
CMDO485GReadout with MODBUS via RS485 (half duplex) with input galvanic separation 
CMDO485FGReadout with MODBUS via RS485 (full duplex) with input galvanic separation 
CMDU232Readout with M-BUS via RS232
CMDU485GReadout with M-BUS via RS485 (half duplex) with input galvanic separation 
CMDU485FGReadout with M-BUS via RS485 (full duplex) with input galvanic separation 

SENSECOM CMD Datasheet EN

SENSECOM-CM1

  • Possible options of input interfaces:
    • RS485 (Half duplex) with MODBUS
  • Registers set for readings on order (1-2 messages per register)
  • Adjustable Reading interval 10min-24h
  • IP20
  • > 2years on battery (2 registers a day)
  • Communication to the nationwide IoT network SIGFOX

SENSECOM-CM1