IoT applications using RFID and BARC readers

  • Monitoring of entrance / work in specific workplaces and remote places (using RFID code), applicable in outdoor/dusty environments.
  • Indication of entry of persons into the operations areas (using RFID code) or eventually with the purpose of their arrival (bar code from goods, delivery notes, work orders, etc. 

These devices are not suitable for entrance gates with the movement of a large number of people (limited mainly by the message capacity in the SIGFOX network / ISM bandwith regulation).

SENSECOM-IDH

IoT Transmission unit for card readings:

  • RFID reader activated by
    • single button (model IDH1)
    • one of two buttons to distinguish purpose of reading (model IDH2)
  • Transmission using SIGFOX nationwide network
  • Endurance > 2 years without battery replacement (~5 messages per day)
  • IP65 (IP67 with silicon)
  • Applicable for people’s occasional entrances to buildings, workplaces, walk points, vigilance button

SENSECOM-IDH

SENSECOM – IDH1  
IoT RFID Reader

SENSECOM-IDH1 Datasheet EN

SENSECOM-IC1

IoT Transmission unit for card and reports readings:

  • Readers:
    • RFID reader activated by attaching the card to the device
    • BARC reader activated by bringing the report with bar code to the device
  • Internal antenna
  • Powered from mains
  • IP60
  • Transmission using SIGFOX nationwide network
  • Applicable for people’s occasional entrances to operations areas with monitoring the beginning and the end of maintenance work there registered by bar code from working instruction report.
SENSECOM-IC1

SENSECOM-IC1

SENSECOM-IC1 Datasheet EN